+0086-400-870-8989
Home
Products
Integrators
Supplier
Operation Video
Download Center
About Us
English
中文
日本語
한국어
Português
ภาษาไทย
Deutsch
Français
English
Online exploration factory
+86 400-870-8989
E-mail
BRTNG09WSS3P/F
Three-axis servo Manipulator
- Simple Operation
- Quick response
- Safe And Efficient
Product Introduction
BRTNG09WSS3P/F series apply to all types of horizontal injection machine ranges of 160T-380T for take-out products. The vertical arm is the telescopic type with the product arm. Three-axis AC servo drive saves time than similar models, accurate positioning, and short forming cycle. After installing the manipulator, the productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste. Three-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes simple equipment maintenance, and low failure rate.
Accurate positioning
Fast
Long service life
Low failure rate
Reduce labor
Telecomm unication
Basic Parameters
| Power Source (kVA) | Recommended I.M.M (ton) | Traverse Driven | Model of EOAT |
| 3.23 | 160T-380T | AC Servo motor | two suctions two fixtures |
| Traverse Stroke (mm) | Crosswise Stroke (mm) | Vertical Stroke (mm) | Max.loading (kg) |
| 1500 | 600 | 950 | 2 |
| Dry Take Out Time (sec) | Dry Cycle Time (sec) | Air Consumption (NI/cycle) | Weight (kg) |
| 0.68 | 4.07 | 3.2 | 300 |
Model representation: W:Telescopic stage. S:Product arm S3:Three-axis driven by AC Servo Motor(Traverse-axis、Vertical-axis+Crosswise-axis)
The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
trajectory chart
| A | B | C | D | E | F | G |
| 1362 | 2275.5 | 950 | 298 | 1500 | / | 219 |
| H | I | J | K | L | M | N |
| / | / | 916 | / | 234.5 | 237.5 | 600 |
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
Precautions for Storage and Handling Caution:
Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.
1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.
2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.
3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.
Product Recommendation
Purchase Consultation
