Welcome to the official website of BORUNTE
Borunte Robot Co., Ltd+0086-400-870-8989
Four-axis Robot


Four-axis Robot

  • Simple Operation
  • Quick response
  • Safe And Efficient

Product Introduction

BRTIRPZ1825A type robot is a four-axis robot that developed by BORUNTE for some monotonous, frequent and repetitive long-term operations or operations in dangerous and harsh environments. The maximum arm length is 1800mm. The maximum load is 25kg. It's flexible with multiple degrees of freedom. Suitable for loading and unloading, handling, dismantling and stacking etc. The protection grade reaches IP40. The repeat positioning accuracy is ±0.08mm.

  • Accurate positioning

    Accurate positioning

  • Fast


  • Long service life

    Long service life

  • Low failure rate

    Low failure rate

  • Reduce labor

    Reduce labor

  • Telecomm unication

    Telecomm unication

Basic Parameters

Item Range Max.speed
Arm J1 ±155° 175°/S
J2 -65°/+30° 135°/S
J3 -62°/+25° 123°/S
Wrist J4 ±360° 300°/S
R34 60°-170° /
Arm Length (mm) Loading Ability (kg) Repeated Positioning Accuracy (mm) Power Source (kVA) Weight (kg)
1800 25 ±0.08 7.33 about 256

trajectory chart

No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

Precautions for Storage and Handling Caution:

Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.

1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.

2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.

3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.