Welcome to the official website of BORUNTE
Borunte Robot Co., Ltd+0086-400-870-8989
Six-axis Robot


Six-axis Robot

  • Simple Operation
  • Quick response
  • Safe And Efficient

Product Introduction

BRTIRUS2110A is a six-axis robot developed by BORUNTE for complex applications with multiple degrees of freedom. The maximum arm length is 2100mm. The maximum load is 10kg. It has six degrees of flexibility. Suitable for welding, loading and unloading, assembling etc. The protection grade reaches IP54 at the wrist and IP40 at the body. The repeat positioning accuracy is ±0.05mm.

  • Accurate positioning

    Accurate positioning

  • Fast


  • Long service life

    Long service life

  • Low failure rate

    Low failure rate

  • Reduce labor

    Reduce labor

  • Telecomm unication

    Telecomm unication

Basic Parameters

Item Range Max.speed
Arm J1 ±155° 110°/S
J2 -90 ° (-140 °, adjustable downward probe)/+65 ° 146°/S
J3 -75°/+110° 134°/S
Wrist J4 ±180° 273°/S
J5 ±115° 300°/S
J6 ±360° 336°/S
Arm Length (mm) Loading Ability (kg) Repeated Positioning Accuracy (mm) Power Source (kVA) Weight (kg)
2100 10 ±0.05 6.11 about 230

trajectory chart

No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

Precautions for Storage and Handling Caution:

Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.

1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.

2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.

3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.