Welcome to the official website of BORUNTE
Borunte Robot Co., Ltd+0086-400-870-8989
Five-axis servo Manipulator


Five-axis servo Manipulator

  • Simple Operation
  • Quick response
  • Safe And Efficient

Product Introduction

BRTM09IDS5PC/FC series is suitable for the finished product extraction of 160T-320T horizontal injection molding machine, single-cut arm type, two arms, five-axis AC servo drive, can be used for quick removal or in-mold sticking, in-mold inserts and other special product applications. Accurate positioning, high speed, long life, low failure rate. Installing the manipulator can increase production capacity by 10-30% and will reduce the defective rate of products, ensure operator safety, and reduce manual labor. Accurately control production, reduce waste and ensure delivery. Five-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, multi-axis can be controlled at the same time, simple equipment maintenance, and low failure rate.

  • Accurate positioning

    Accurate positioning

  • Fast


  • Long service life

    Long service life

  • Low failure rate

    Low failure rate

  • Reduce labor

    Reduce labor

  • Telecomm unication

    Telecomm unication

Basic Parameters

Power Source (kVA) Recommended I.M.M (ton) Traverse Driven Model of EOAT
3.1 160T-320T AC Servo motor two suctions four fixtures
Traverse Stroke (mm) Crosswise Stroke (mm) Vertical Stroke (mm) Max.loading (kg)
1500 P:650-R:650 900 10
Dry Take Out Time (sec) Dry Cycle Time (sec) Air Consumption (NI/cycle) Weight (kg)
2.74 7.60 4 310

Model representation: I:Single cut type. D:Product arm +runner arm. S5:Five-axis driven by AC Servo Motor(Traverse-axis、Vertical-axis+Crosswise-axis)

The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.

trajectory chart


No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

Precautions for Storage and Handling Caution:

Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.

1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.

2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.

3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.